shayshay35
shayshay35
04-04-2017
Mathematics
contestada
reduce the ratio to its lowest form 50:90
Respuesta :
VACly
VACly
04-04-2017
5:9
You need to find the greatest common factor and divide each side by it.
In this case it is 10... 50/10 = 5 90/10 = 9
So 50:90 = 5:9
Answer Link
toadallyadorable
toadallyadorable
04-04-2017
10:18
divided both by 5 because that is for both the LCF besides 2
Answer Link
VER TODAS LAS RESPUESTAS ( 21+ )
Otras preguntas
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
Your model locomotive is 16 inches long. It is an exact model of a locomotive that is 40 feet long. A window on the locomotive is how many times wider than a wi
a drawing of a surboard in a catalog shows it's length as 8 4/9 inches. find the actual length of surfboard if 1/2 inch length on the drawing correspond to 3/8
